cause it real quite in here for Monday
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Everyone must be working hard http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3668 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Mon Oct 31, 2005 4:32 am ] |
| Post subject: | |
cause it real quite in here for Monday
|
|
| Author: | Steve Kinnaird [ Mon Oct 31, 2005 5:25 am ] |
| Post subject: | |
Hardly working! 
Steve |
|
| Author: | Don Williams [ Mon Oct 31, 2005 6:01 am ] |
| Post subject: | |
Me too! Working hard, I mean...it's a Monday, they tend to be busy for most desk-job folk. |
|
| Author: | L. Presnall [ Mon Oct 31, 2005 7:24 am ] |
| Post subject: | |
C'mon guys! I need my daily fix of all things luthiery! That's how I make it thru my flight rigs...if I can't be making a guitar I want to hear about you guys making guitars!!
|
|
| Author: | Bobc [ Mon Oct 31, 2005 8:42 am ] |
| Post subject: | |
Well I've been fooling around most of the day figuring out the best way to mount the power feed I bought from Grizzly on my Laguna. The saw`table is on the small side so I had to buy a mounting plate. a real pain to say the least. |
|
| Author: | John How [ Mon Oct 31, 2005 8:48 am ] |
| Post subject: | |
Yeah but I can see that precision cut Zootwood rolling off that saw right now. Just curious, is the power feeder in front of or behind the blade? I'm just guessing it's behind the blade. |
|
| Author: | Bobc [ Mon Oct 31, 2005 9:55 am ] |
| Post subject: | |
John here's what it looks like but my unit is a bit smaller. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|